Home»Our Product Range»

Vibration Testing And Simulator

We are one of the renowned manufacturer of Vibration Testing and Simulation Equipment in India. These are in compliance with the international standards and exported to different countries across the globe. Our range is manufactured using quality materials and also offered in customized specifications as per the clients’ requirements.


Block vibration Test equipment consists of Vibration Exciter and Vibration controller.

Vibration Exciter generates vibration in one plane as per IS standard requirement. The force of Vibration can be varied by changing the cam position. The vibration controller have two functions, Vibration Monitoring and Vibration Control. The frequency of Vibration can be controlled from 2Hz to 50 Hz stepless variable. The monitoring part monitors the vibration parameters using an accelerometer sensor. The parameters displayed and logged are Displacement, Velocity, Acceleration, frequency and time. Two modes of operations are provided, manual and Ramp. The timer can be set for both mode of operations and the logged data can be saved on a pen drive and can be taken to PC for further processing and records in excel format.

 

We manufacture Vibration Testing and  Simulator Equipments which find numerous applications. These are used for simulating the vibration environmental conditions for testing of component and equipment in the factory before  dispatch by the quality control department. The product is subjected to sinusoidal vibrations over a given frequency range or at a discrete frequency for a given period of time. These are mechanical vibration shaker are cheap alternative to electro dynamic shakers.

Technical Specifications:

These Mechanical Shakers are available in various Table Top sizes and payload capacities. They are manufactures toTested according to A.G.R.E.E. standard in electronic industry or any other standard where the parameters are within following specifications:

Frequency Range

5 Hz to 100 Hz Sine wave

Testing Mode

Manual / Auto (linear, Sweep, Random, Octave)

Display (digital)

Frequency, displacement, velocity, Acceleration

Timer

0 to 99 hour programmable

Reset Button

To stop the sweep cycle at any given instance

Data logging

can be provided for Velocity, Displacement, acceleration, frequency etc. and the datacan be transferred to a PC for further processing, calculation, graph, trend or recors requirements.

Input Signal

Through sensor and cable

Protection

Vibrator over load, under voltage, over voltage etc

Indication

Trip, Timer (ON/OFF)

 


Applications:

  • Electronic & Electrical Instruments
  • Electronic parts, components and PCBS
  • Automobile Industries
  • Packaging Industries
  • Portable Mechanical Instruments
  • Simulation of transport conditions in laboratory
  • consumer appliances


Other Information
  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
  • F. O. B. Price Order: 1 USD
  • Port of Dispatch: Mumbai, Nahva sheva

The Package & Jolt Testing Machine that we offer is rigidly fabricated using MS structures. It has a suspended upper tabletop for vibration by bearing blocks. The equipment is as per IS standard and also follows ASTM standard for package testing. The Vibration Test Tables are widely used for testing of containers, packages for simulating the transport and handling conditions through rail, road, ship or air.

Technical Specifications:

  • Varying frequency of vibration using the panel box from 2Hz to 6 Hz
  • Fixed amplitude of 25mm, which is generated using cam assembly

Three modes available:

  • In phase vibrations , both the cam assembly is in phase and the tabletop ends moves simultaneously
  • 90/180 Deg out of phase, the cam assembly are 90/180 degrees out of phase with each other
  • One end of the table moves 90/180 degrees out of phase with respect to the other Straight up/down vibrations can be generated instead of elliptical vibration

Applications: These machines are widely used for simulating the Road condition and handling of packages:
  •  testing of containers
  •  testing of drums
  •  testing of packages
  •  testing of electronic equipments
  •  testing of Automobile components
  •  testing of defence equipments/components



Other Information
  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
  • Port of Dispatch: Mumbai, Nahva sheva

The Vibration Road Simulation Equipment that we offer is rigidly fabricated using MS structures. It has a suspended upper tabletop for vibration by bearing blocks. The equipment is as per IS 2078 standard and also follows ASTM standard. The Vibration Test Tables are widely used for testing of containers, packages for simulating the transport and handling conditions through rail, road, ship or air.

Technical Specifications:

  • Varying frequency of vibration using the panel box from 2Hz to 6 Hz
  • Fixed amplitude of 25mm, which is generated using cam assembly
  • 0 - 99 hours programmable timer is provide for test duration. The machine stops automatically after the desired time is elapsed

Three modes available:


  • In phase vibrations , both the cam assembly is in phase and the tabletop ends moves simultaneously
  • 30 Deg out of phase, the cam assembly are 30 degrees out of phase with each other
  • Only verticle, Straight up/down vibrations can be generated instead of elliptical vibration

Applications: These machines are widely used for simulating the Road condition and handling of packages:

  • testing of containers
  • testing of IBC
  • testing of drums
  • testing of packages
  • testing of electronic equipments
  • testing of Automobile components
  • testing of defence equipments/components



Other Information
  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 6 pcs per month
  • Delivery Time: 4 weeks

The Vibration Test Equipment for IBC that we offer is rigidly fabricated using MS structures. It has a suspended upper tabletop for vibration by bearing blocks. The equipment is as per IS standard and also follows ASTM standard for IBC testing. The Vibration Test Tables are widely used for testing of IBC containers, packages for simulating the transport and handling conditions through rail, road, ship or air.

Technical Specifications:

  • Varying frequency of vibration using the panel box from 2Hz to 6 Hz
  • Fixed amplitude of 25mm, which is generated using cam assembly
  • 0-99 hours programmable timer is provided for test duration
  • In phase vibrations , both the cam assembly is in phase and the tabletop ends moves simultaneously
Applications: These machines are widely used for simulating the Road condition and handling of packages:

  • testing of IBC containers
  • testing of drums
  • testing of packages
  • testing of defence equipments/components

We are manufacturers of Vibration Test Machine for Fire Fighting Equipments. The machine consists of Vibration Test Bench and the control panel.

The Vibration Test Bench holds the fire fighting equipment on the table and the vibrations are transmitted to the test object. The control Panel generates variable frequency vibration, monitors the vibration parameters and logs the data for future requirements and authetication. The test is conducted as per the IS standard. The timer is also provided for total test duration. Different modes of Vibration Test can be selected like Traingular Sweep, Sawtooth sweep, octave sweep, random sweep etc.

The equipment is videly used for testing of fire extinguishers and other fire fighting equipments as per IS standard.

 

Good Earth Engineering Industries

Hemant Shah (Partner)
No. 6, Tarun Plastic Industrial Estate, Mogra Village Road, Andheri East
Mumbai - 400069
Maharashtra, India
© Good Earth Engineering Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited